#Bath spout how to#
#Bath spout free#

If you try and rip it free, you’ll cause damage to this or even destroy the entire spout or piping system. If the initial pressure you apply doesn’t work, again, don’t force it – there may be copper threads inside the pipe connected to the spout that are holding it in place. As with a screw-on spout, you need to be gentle so as not to damage the internal workings of the pipe.

#Bath spout free#

Once you have removed the screw, you should be able to pull the spout free with another strong twist.

If you are working with a slip-on spout, take the screw at the bottom, which should be holding the faucet in place, and start turning it clockwise, again taking care not to strip the screw or damage the piping. Once you have achieved this, rotate the spout free of the copper piping. On the other hand, if your screw-on is attached to the wall via copper-threaded fitting, you’ll want to cut that threading away first with a wire cutter that is suitable for cutting through tubing. Be sure to proceed with caution when doing so, lest you accidentally poke a hole in the faucet. If the latter is the case, you’ll need to scrape away any excess caulk before removing it. Screw-on faucets can sometimes be especially stubborn because of internal threading within the spout, or because they have been caulked onto the wall. The pliers should simply help you remove a tub spout that is a bit stubborn, not rip one out of the wall. However, as stated above, you shouldn’t force the spout free. However, as mentioned above, if your tub spout is old, has suffered rust and water damage, or is otherwise corroded, you may need to resort to a pair of pliers. If your tub spout is a screw-on, you should be able to remove it by removing the screws and simply twisting it free. Once you have determined the type of faucet you have, you can start to take more concrete steps in terms of actually removing it.

If you see connecting screws, it’s a screw on. These are typically installed by being set over a tub’s copper piping and secured in place with a setscrew underneath, hence the small hole at the bottom.īy contrast, screw-on spouts won’t have these retaining setscrews and are instead screwed more directly onto the tub. If the base of your faucet has a small hole at the end, chances are it is a slip-on. To start with, it’s important that you identify what kind of spout you have.

#Bath spout how to#

How To Remove Tub Spout (Without Set Screw) There are many reasons why your tub’s spout may be stuck like this, with rust resulting from water damage and calcification being the most common. (It’s also why you shouldn’t try to force them – doing so will only result in breaking the spout, your tiling, or both.) This is why, even if you apply a fair amount of force, you often can’t get tub spouts to budge. The most common reason for tub spouts sticking in place is that corrosion has occurred. Let’s take a closer look at how this happens, why, and what you can do to remove the spout and fix the problem long-term. Neither you nor anyone around you is going to be pleased if you give up bathing. There are any number of ways you might have realized that your tub’s spout is stuck, but that still begs the question – why, and what are you going to do about it?Īfter all, you have to do something. Or maybe it came to your attention in the midst of repair work. Maybe you noticed when you were trying to get your kids to wash up before dinner. You may have noticed when you went to draw yourself a bath after a long day of work. In this guide, I will show you how to remove tub spout without set screw and also how to remove a tub spout that’s stuck and get back to enjoying your relaxing or refreshing bath at home!